Construction of SHARPIE BATHSEAL

Make sure the construction location clean and dry.

Please prepare scraper, masking tapes, towels. If you use cartridges, please prepare glue gun.

Use the nozzle to puncture the mouth. If it is difficult to open, you can use sticker to puncture the mouth.

Use the masking tape to prevent from applying needless parts.

The masking tape should be stick directly along the two sides of the cracks.

The nozzle size should be cut according to the size of cracks. It is recommended that cutting before opening the mouth of the tube.

Squeeze the silicone out with two hands.

The hands maybe tired, but please keep the construction with same strength.

To strengthen the glutinosity, you can use scraper to press the filler.

Now the filling part is end here. Then strickle with certain strength and speed.

Do it carefully to prevent from polluting the surroundings. If the hands touch the filler, please wash hands as soon as possible.

Surface cure takes about 20 minutes. Some location like the joints of bathroom need about half day.